STEP 5
1. Insert 2 wood dowels (A) into dowel holes on left support board (14).
2. Screw 3 cam bolts (B) into pre-threaded holes on left support board (14.
3. Insert 2 wood dowels (A) into dowel holes on right support board (15).
4.Screw 3 cam bolts (B) into pre-threaded holes on right support board (15).
5.Attach 2 hinges (E) to the left support board (14).
6.Insert 6 wood screws (D) through holes on hinges (E) and tighten to left support board (14).
STEP 6
STEP 6
1. Screw 6 cam bolts (B) into pre-threaded holes on both left side panel (2) and right side panel (1).
2. Insert 6 wood dowels (A) into dowel holes on left side panel (2) and right side panel (1).
3. Attach drawer slides (attach to side panel-T) to left side panel (2), insert 3 wood screw (S) through holes
on drawer slides (attach to side panel-T) and tighten to left side panel (2).
4. Attach drawer slides (attach to side panel-T) to right side panel (1), insert 3 wood screw (S) through holes
on drawer slides attach to side panel (T) and tighten to right side panel (1).
To Next Page
Loading...
