Picture 30 – Correct position of the rounded washers.
5.14 THERMIC DILATATION
During the use all the materials of the device are subjected to dilatation and light moving due to
the temperature variations. This phenomenon must not be prevented otherwise deformations and
breakings may occur. For this reason, the spaces that allow the dilatation both internal and
external of the cooker or thermal cooker must be kept free and clean.
5.15 EXTRAORDINARY MAINTENANCE
Most of the parts of the cookers and thermal cookers are easy to remove with a simple
screwdriver, eventual repairs or modifies will be faster if the concerned piece, directly or by a
dealer is sent to our factory. If you need accessories or spare parts, please tell us the serial number
of the cooker indicated in the green booklet given together with the device. The serial number is
also indicated on a plate placed on the side of the wood box.
To Next Page
Loading...
