RKC INSTRUMENT CB100 - Page 14

3. SETTING FOR COMMUNICATION
IMCB03-E4
8
2. Set the device address. Press the UP key to enter "5" in the lowest digit.
3. Press the <R/S key to brightly light the tens digit.
4. Press the UP key to enter "1" in the tens digit.
5. Press the SET key to select the next communication parameter. As a result, the set device
address is registered.
SET
R/S
SV
PV
ALM2ALM1AT OUT2OUT1
SET
R/S
SV
PV
ALM2ALM1AT OUT2OUT1
R/S
SV
PV
SET
ALM2ALM1AT OUT2OUT1