Roadmaster CRUISER - Attach The Pedals

Assembly 3
27
27
WARNING!
Figure 3.17
❶ MatchthepedalmarkedRwiththeright-handcrankarm
andmatchthepedalmarkedLwiththele-handcrankarm.
Figure 3.17
❷ Placethethreadedpedalintothethreadedholeonthe
crankarm.
❸ Byhand,slowlyturnthespindlethecorrectdirecon.
Clockwiseforrightsidepedal,counterclockwiseforleside
pedal.Important!Stopifyoufeelresistance!Thismaybe
anindicaonthespindleisenteringtheholeatan
angle.Removethespindleandrepeatsteptwoandthree.
❹ Ifthespindleisenteringtheholecleanlythenusea15mm
wrenchorplierstoghtencompletely.
❺ Repeatsteps1-4fortheremainingpedal.
ATTACH THE PEDALS
• Aachmentofanincorrectpedalintoacrankarmcanstrip
pedalthreadsandcauseirreparabledamage.Visually
matchtheRandLsckersonthepedalandcrankarm
beforeaachingthepedals.Beforeyourrstride,please
checktoensureyourpedalsareaachedcorrectly.
• Itisveryimportantthatyoucheckthecranksetforcorrect
adjustmentandghtnessbeforeridingyourbicycle.
Thelepedalturns
counter-clockwiseandthe
rightpedalturnsclockwise.
1
1
2
3
3
2