and locked as shown in this photo.
Failure to properly secure pins will
result in loss of towed vehicle.
IMPORTANT:
Base Pins
Must Be Installed
FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN
PROPERTY DAMAGE, PERSONAL INJURY OR DEATH
STEP 6
8
STEP 5
Now, swing the other arm to the opposite side and connect in the same manner. Before continuing make sure
your vehicle is prepared for towing as per the manufacturer's instructions. In particular make sure:
a. Your steering wheel is in the unlocked position so it can freely move
b. The transmission is in the correct gear for towing
c. The emergency brake is released
d. You've connected your safety cables and wiring
Now slowly pull away in the motorhome. Your tow bar will self center and the AUTOWLOK Sys-
tem will "SNAP" into position as you drive away. Visually verify that the locks have engaged before
taking your trip.
TIP: If the STERLING arm does not automatically lock when you pull the motorhome ahead, try turning the mo-
torhome left, then right as you drive away. This will pull each arm in the necessary direction to engage the locking
mechanism.
To Next Page
Loading...
