EasyManua.ls Logo

Roberts Blutune T2 - Using USB Memory Devices

Roberts Blutune T2
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
Using USB memory devices
This section describes how to use your radio to access and playback your
audiolesviaUSBmemorydevices.USBmemorydevicesplugintothe
rectangular slot on the back of the radio.
Note: USB playback is not guaranteed when the radio is powered from
the batteries.
The Blutune T2 radio has been tested with a range of USB memory devices
ofupto256GBcapacity.USBmemorymustusetheFATorFAT32ling
system in order to operate with your radio. Your radio is unable to play from
media formatted using the exFAT or NTFS formats.
YourradioisonlydesignedtoworkwithUSBashmemorydevices.Itisnot
intended to be connected to hard disk drives or any other type of USB device.
It is possible to use SD, SDHC or SDXC cards for media storage and
playback when held in a suitable USB adaptor. However, due to the
wide variation of such adaptors, it is not possible to guarantee that all
adaptor / card combinations will work in the radio.
Audio formats supported are AAC, FLAC, MP3 and WAV.
Recommendations:
UnlessyouhaveonlyafewlesontheUSBmemorydevice,donot
placealllesintherootfolder.
Thenumberofitems(les/sub-folders)inanyfoldershouldbeless
than 2000.
Searchingandplaybackwillbemoreresponsiveifthenumberofles
in any one folder is limited (we suggest not more than 250).
It is recommended that the USB memory is reformatted in your computer
beforeaddingyourmusicles.
The maximum depth of folder nesting permitted is 8 folder levels (but
playback is only from the currently selected level).
Theshufefunctionislimitedto500tracks.
Albumartwithinmusiclesshouldnotbelargerthan500x500pixels.
Cautions:
In order to minimise the risk of damage to your radio or your USB
memory, please place the unit so that the memory device cannot easily
be knocked while it is inserted in the socket.
Remove the USB memory before carrying the unit or if not using the
USB feature for a prolonged period.
Place the unit in Standby mode before removing your USB memory
device.
TheUSBconnectionisintendedonlyforashmemorydevices.The
use of hard disk storage media is not supported.
PlaybackviaUSBoflesstoredonMP3playersisnotguaranteed.
Aux In 1

Related product manuals