Roberts Blutune T2 - Operating Your Radio - DAB

7
Tuning
Select / Info / Snooze
Operating your radio - DAB
1. Press the On/Standby button to switch on your radio.
2. Whenrstswitchedon,theradiowillbeinDABmode.Aftereachusethe
radio will remember the mode used and then switch on in that mode the next
time it is used. If the radio has been used before, the last used station will
be selected.
3. IfthisisthersttimetheradiohasbeenusedascanoftheBandIIIDAB
channels will be carried out (depending on whether scanning was already
completed in standby mode). During the scanning process the display will
show the progress of the station search. The number on the display is the
number of stations that have been found.
4. When the scan is completed the rst station (in numeric-alpha order
0...9...A....Z)willbeselected.The rst stationinthelist ofstationsfound
during scanning will be highlighted. Rotate Tuning to step through the list
of available stations. Press Tuning to select and tune to the desired station.
The display will show the station name.
5. If no signals are found then it may be necessary to relocate your radio to a
positiongivingbetterreception.Youshouldthencarryoutascantondnew
stations as described on page 8.
• Your radio has an indicator
on the display to indicate the strength of the
DAB radio signal being received.
Note:Whenrstswitchedon,theradiowillsetthevolumetoamoderatelyhigh
level, in case the broadcast is very quiet. After you have set the volume, the radio
will remember the setting that you have applied for the next time that it is used.
Scanning
Stations
DAB
29
BBC Radio 2
BBC Radio 3
BBC Radio 4
BBC Radio 5 Live
BBC R5LiveSportX
BBC Radio1Xtra
Station list