EasyManua.ls Logo

Roberts Ortus Time - Presetting Radio Stations; Storing Radio Presets; Recalling Radio Presets

Roberts Ortus Time
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
Presetting stations
You may store your preferred DAB and FM radio stations to the preset station memories. There are 20 memory presets in your clock radio, 10 for DAB
and 10 for FM. Presets are remembered by your clock radio in the event of a power failure.
The procedure for setting presets and using them to tune stations is the same for FM and DAB modes, and is described below.
Storing a preset
1. Press On/Off to switch on the clock radio.
2. Select either the FM or DAB mode using the Menu/Mode button.
3. Tune to the required station as previously described.
4. Press and release the Preset button. The display will show, for example,
(PSW\ if no station has been stored to that preset.
5. Rotate Tuning to select the desired preset number under which you wish
to store the station.
6. Apply a long press on the Tuning control. The display will show,
'STORED'. The station will be stored under the chosen preset. Repeat
this procedure as needed for the remaining presets. Stations which are
already stored in the presets may be overwritten by following the above
procedure.
Recalling a preset
1. Press On/Off to switch on the clock radio.
2. Select either the FM or DAB mode using the Menu/Mode button.
3. Press and release the Preset button. The display will show, for example,
(PSW\ if no station has been stored to that preset. If a preset has
been stored, then the display will show either the station name (for DAB
stations) or the frequency (for FM stations).
4. Rotate Tuning to select the desired station. Press Tuning. Your clock
radio will then tune to the station stored in the selected preset memory.
Mode
Mode

Related product manuals