Roberts Ortus Time - My EQ Custom Sound Settings

18
My EQ
You may set the treble and bass levels to your own preferences using the
'My EQ' menu.
1. Follow steps 1-4 on the previous page to enter the Equaliser setup menu.
2. Rotate Tuning until 'My EQ,,,' shows on the display.
3. Press Tuning. Rotate Tuning until Treble or Bass is displayed.
4. Press Tuning. The current Bass or Treble level will be shown on the
display.
5. To adjust the Treble or Bass setting rotate Tuning until the desired level
(-7 and +7) is displayed.
6. Press Tuning WRFRQ¿UP\RXUFKRLFH
To cancel the effect of the 'My EQ'SUR¿OHFKRRVHWKH1RUPDO option from
the equaliser menu. Note: The treble and bass settings will be remembered
for the next time you wish to use the 'My EQ' setting.
The loudness setting in the 'EQ' menu increases the bass and treble at
low volume settings.
USB socket for smartphone or tablet charging
Your clock radio has a USB socket which can be used for charging a smart-
phone, tablet or other similar devices.
Charge time may vary and in some cases may take longer to charge than when
using the manufacturers charging unit supplied with the device.
1. Ensure your clock radio is plugged in.
2. Connect your device to the USB charging socket at the rear of your clock
radio.
3. Your device will begin to charge.
4. Once your device has charged remove the USB lead.
2