Roberts R1 - Controls and Connections

5
1
2
Controls and connections cont.
The best way to control your speaker is by using the UNDOK app. However
you can also use the buttons on your R1 for the following functions.
1. Pressing the On/Standby button brings your speaker out of Standby
mode.
Pressing the On/Standby button while the speaker is in use will cause
it to return to the Standby mode. The Standby indicator will light.
2. Press and release the Mode button to select the desired operating
mode, Internet Radio, Spotify, Music Player, Bluetooth or Auxiliary Input.
The Mode indicator will change colour according to the music source
selected (see page 32).
Instructions for each operating mode are given in the later sections
of this book.
 <RXFDQFRQWUROPXVLFSOD\EDFNXVLQJWKHPlay/Pause, Next or Previous
buttons on the speaker.
 <RXFDQFRQWUROWKHYROXPHXVLQJWKHUp and Down Volume buttons
on your speaker.
Note: You will need to use the UNDOK app to select your choice
of content for most operating modes.
33
3
4
4