PROGRAMMING
19
1. Select HEAT or COOL using the system key.
Note: Heat and cool need to be programmed separately.
2. Press MENU (If menu does not appear rst, press RUN SCHED).
3. Press SET SCHED. Note: Monday will be displayed and the WAKE icon
is shown.
4. Time will be ashing. Use or to make your time selection for that day’s
WAKE time period. Note: If you want the fan to run continuously during this
time period, select ON with the FAN key.
5. Press NEXT STEP.
6. The set-point temperature will be ashing. Use or to make your
set-point selection for the WAKE time period for Monday–Friday
(or Monday if in 7 Day mode).
7. Press NEXT STEP.
8. Repeat steps 4 through 7 for the LEAVE time period, for the RETURN
time period, and for the SLEEP time period for Monday–Friday
(or Monday if in 7 Day mode).
Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday
Repeat steps 4 thru 7 for the remaining days of the week.
To Next Page
Loading...
Need help?
General
