Robertshaw SENSE SMART 2000 User Manual

36
MANUAL MODE
On / Off and Mode Selection
PresstheModebuontocyclethethermostatthroughtheavailablemodes:
Heat,Cool,Automode(ShownbyHEATandCOOLintheLCD),EmergencyHeat(if
ed),andOFF.IftheFanmodeissettoFANON,whenyouselectOFFmodethe
FanmodewillautomacallychangetoFANAUTO.
NOTE: Not all modes may be active on your thermostat.
Setting the Fan Function
Detailsonthefancontrolfunconsofthethermostatcanbefoundonpage15
of this manual.
Setting the Clock
Thethermostatisedwitharealmeclock.Thisclockisprovidedtodisplaythe
currentme.Ithasnootherfuncon.
Tosettheclock,pressandholdthePROGbuonforthreeseconds.TheLCDwill
showtheHoursDigitashing.Usethep or  buttons to adjust the hours to the
correctme(notetheAM/PMsymbol).PressthePROGbuonandnowthe
Minutesdigitswillash.Adjustthisvalueusingthep or  buttons to show the
correct minute.

Robertshaw SENSE SMART 2000 Specifications

General

Type	Programmable
Stages	1 Heat/1 Cool
Power Source	Battery
Backlight	Yes
Hold Feature	Yes
Filter Change Indicator	Yes
System Switch	Heat/Cool/Off
Fan Control	Auto/On
Compatibility	Conventional systems
Temperature Range	45°F to 90°F (7°C to 32°C)