Robertshaw SENSE SMART 2000 User Manual

8
TheSMART2000thermostatcanbeconguredbyyourinstallerfora
largevarietyofconguraonsandfunconssothatyourthermostat
is set to meet your individual needs. This manual may describe a
funconorfeaturenotacveonyourthermostat.
PROGRAMMING THE SMART 2000
Thisthermostathasseveralfeaturesandoperangmodesthattheusershould
become familiar with before programming.
The steps to properly program your SMART 2000 are:
• Determine which type of thermostat (programmable or manual) you have.
• Take the time to write down any temperature settings or start/stop times you
willbeusing,Table1-HeatingandTable2-Cooling.
Commercial: Single setpoint or two setpoints
Residential: Day/night setpoints or seven day with four events.
NOTE: The heat setpoint cannot be set higher than the cool setpoint and the
cool setpoint cannot be set lower than the heat setpoint.
• Review the Common Functions section.
• UsethesectionthatdescribesyourSMART2000(Residential,Commercial,or
Manual) and follow the steps provided.

Robertshaw SENSE SMART 2000 Specifications

General

Brand	Robertshaw
Model	SENSE SMART 2000
Category	Thermostat
Language	English