Robertshaw SENSE SMART 2000 User Manual

7
TofurtherdetermineiftheManualmodeisResidenalorCommercial,usethe
MODEbuon.
• Press the MODE button until the left center window displays MODE and HEAT.
• Press the p button to display SET and a temperature setting in the large
window.
• Press p again to raise the number by one degree.
• Remember to record that new number.
• Press MODE to exit.
• Press the MODE button until the left center window displays MODE and COOL.
• Press the p button to display SET and a temperature.
• If the temperature number is the same as the new number of the previous
setting,thenthisthermostathasasinglesetpoint.Thismeansitisoperatingas
a Manual Commercial thermostat.
• Ifthetwotemperaturenumbersaredifferent,thethermostathastwo
setpoints,andtheoperatingmodeisManualResidential.
Forclarity,thisusermanualisbrokenintothefollowingmainsecons.
ResidenalProgrammableMode.Seepage11.
Commercial Programmable Mode. See page 11.
Manual Mode. See page 12.
CommonFunconstoallmodes.Seepage11foraddionalfuncons.

Robertshaw SENSE SMART 2000 Specifications

General

Brand	Robertshaw
Model	SENSE SMART 2000
Category	Thermostat
Language	English