Robertshaw SENSE SMART 2000 - COMMON FUNCTIONS; MODE Button Functionality; O;RIDE Button (Override) - Commercial Mode; O;RIDE Button (Override) - Residential Mode

11
COMMON FUNCTIONS
SMART 2000 Buttons
MODE
PressthisbuontocycletheSMART2000thermostatthroughtheavailable
modes:Heatonly,Coolonly,Autochangeovermode,EmergencyHeat(if
ed),andOFF.WhensengthethermostattoOFFmode,thefanmodewill
changeautomacallytoFanAutomodesothefandoesnotconnuetorun
unexpectedly.
NOTE: Not all modes may be active on your thermostat.

Commercial Programmable Mode
Thisbuoniniatestheaerhoursrunmer.Thisisaninstallerprogrammed
period which replaces the stop program temperatures and temporarily uses
the start program temperatures for a pre-set 2-hour period. A second press
willcanceltheaerhoursrunmer.

TheO/RIDEbuonisusedtooverridethecurrentprogramsmeschedule
andtoholdthecurrentlysettemperatureindenitely.HOLDwillbedisplayed
intheLCDtoconrmthisfunconisacve.Thissettemperaturewillbe
maintainedunlreleasedbypressingtheO/RIDEbuonagain.