Robertshaw SENSE SMART 2000 - UP and DOWN Button Functionality; PROG (PROGRAM) Button Usage

12
p
Usethisbuontoincreasethedesiredroomtemperaturefortheheangor
coolingmodes,orincreasea“value”inprogrammingmodes.Alsousedto
override the pre-programmed temperatures and temporarily replace them
with a new higher set temperature for a 2-hour period. The user can change
thisoverrideperiodtoholdunlthenextscheduledevent.

Usethisbuontodecreasethedesiredroomtemperatureforheangor
coolingmodes,ordecreasea“value”inprogrammingmodes.Alsousedto
override the pre-programmed temperatures and temporarily replace them
with a new lower set temperature for a 2-hour period. The user can change
thisoverrideperiodtoholdunlthenextscheduledevent.


PressthePROGbuontobeginsengtheclock.PressandholdthePROG
buonforthreesecondstobeginprogrammingyourdailyevents.
In Manual mode:
PressthePROGbuontoswitchbetweenDayandNightmodes.Pressand
holdthePROGbuonforthreesecondstosettheclock.