Robin EH12 - Page 30

Step
23
Part to remove 1
Main bearing
cover
Procedures
(I) Remove main bearing cover fastening
bolts.
M6X30mm bolt
and washer 8pcs.
(EHI2,17)
M8X 30mm bolt and washer .--e 8pcs.
(EH 25)
(2) Remove main bearing cover using plastic
hammer.
(See Fig. 5-15)
Remarks
Be careful not to damage
oil seal.
Tool
IOmrn, 12rnrn
socket wrench
Fig. 5-1 5
- 26 -