Robin EH30V - Page 24

Step lPart to rem0
I
1
13 Flywheel
Procedures
(1) Remove rotating screen from flywheel.
8 X 12mm Bolt .-.- 3pcs.
(2) Remove nut from crankshaft.
(See Fig.
26.)
16 4 Nut ---a lpce.
(See Fig. 27.)
6 d X 30mm Bolt *-*= 2pcs.
(3) Remove flywheel using flywheel puller.
(4) Remove charge coil.(See Fig. 28.)
$- 8 + BOLT : BPCS.
STARTER PULLEY
"
'FLYWHEEL
Remarks
Flywheel can easily be
removed by striking
the head
of the center
bolt of flywheel puller
with
a hammer.
Tool
12mm Box wrench
24mm
Box wrench
lOmm
Box wrench
1
Fig. 26
I
fig. 27
Fig. 25
I
CHARGE COIL
Fig. 28
- 20. -