Robin EH30V - Page 29

Step
19
20
-
I
'art to remove1 Procedures I Remarks I Tool
Main
bearing
cover
(1) Remove keys from crankshaft prior to
removal of main bearing cover.
(See
Fig. 36.)
(2) Remove main bearing cover.
(See Fig. 37.)
8 q5 X 45mm Bolt .-.- 7pcs.
Use a soft hammer and
evenly tap around outer
surface of cover.
Avoid damage to
oil
seal from crankshaft
key
way.
Do not loose crankshaft
and camshaft spacer.
12mm
Box wrench
Oil pump
(1) Remove oil filter (Screen) from main
bearing cover.
6 4 x 12mm Bolt ---e lpce.
6 q5 x 25mm Bolt -*-. 3pcs.
(Outer).
(2) Remove holder (Camshaft).
(3) Remove oil pump (Inner) and oil pump
10mm Box wrench
1Omm Box wrench
6 + FLANGE BOL
6 + FLANGE BOLT : 3pcs.
HOLDER (CAMSHAFT)
OIL
PUMP (INNER) MAIN BEARING
COVER
v
h8 + FLANGE BOLT : 7pcs.
fig. 35
Fig. 36
Fig. 37
- 25 -