Robin EH30V - Page 57

(5) The 4mm screws (2pcs.I
(6) The brush holder.
(7) "M" terminal bush No, 2.
The brush holde is disassembled by re-
moving the 4 mm screws. (2pcs.I
Remove the
"M" terminal bush No, 2.
(8) Yoke assembly.
Remove the yoke assembly.
(9) The pinion stopper clip.
The pinion stopper clip is removed with
a
standard screwdriver while the pinion
stopper
is pushed toward the pinion.
6 7
Fig. 84
Fig. 85
Fig. 86
- 53 -