Robomow RC306 User Manual

7
EN
Chapter 2 – Know Your Robomow®
2.1 What’s in the Box
1 Robomow® 7
RoboRuler Used for measuring the distance of
the Perimeter Wire from the lawn edge.
2
Wire Pegs* Used for securing the wire to the
ground.
8
Base Station Used by Robomow to dock and
charge when it is not mowing.
3
Perimeter Wire* Used to create a virtual wall for
your Robomow.
9
Base Station Stakes Used for securing the Base
Station to the ground
4 Operating & Safety Manual 10
Extension Cable 15 meters (50 ft.), (Low voltage
cable)
5
Wire Connectors Used for splicing wires (as
needed)
11
Power Box
The primary purpose of the Power Box is power
supply for charging Robomow.
Used to deactivate (halt) the automatic
operation mode and reactivate it as needed.
6
Plot Connectors Used for connecting the
Perimeter Wire to the Base Station.
12
Power Box MountUsedforxingthePowerBox
to a wall (including Screws and dowels).
(*) All Pro models are intended for professional installation. Pegs and wire are not included in the package.
Operating & Safety Manual
12
11
10
9
8
6
5
7
4
3
1
2

Robomow RC306 Specifications

General

Type	Robotic lawn mower
Cutting width	280 mm
Cutting system	-
Recommended lawn area	600 m²
Maximum cutting height	60 mm
Minimum cutting height	15 mm
Grass collecting volume	- L
Battery type	LiFePO4
Power source	Battery
Charging time	1 h
Battery voltage	26 V

Weight and Dimensions

Depth	460 mm
Width	630 mm
Height	210 mm
Weight	11400 g