7
• W ORKING HEIGHT
We recommend that you position the food processor on
a stable worktop so that the upper edge of the large feed
hopper is at a height of between 1.20 m and 1.30 m.
• N OISE LEVEL
The equivalent continuous sound level when the food
processor is operating on no-load is less than
70 db (A).
EXAMPLES
The cutter will enable your to perform all your cutting
tasks in minimum time; we recommend therefore, that
you keep a close eye on the mixture in order to ob-
tain the desired results.
- Automatic bowl locking.
- Extremely simple unlocking of bowl by means of a
trigger fitted in the handle.
- Lid designed to allow the addition of liquid or ingre-
dients during processing.
- Models R5 Plus and R5 V.V. are equipped with a
straight blade knife supplied as standard equip-
ment and can be provided with an optional serra-
ted blade for grinding and kneading tasks.
- Models R6 and R6 V.V. are supplied with an all-
stainless steel straight blade knife that is fully
removable and can be fitted with serrated blades.
- Flat motor base for easier fitting and cleaning of at-
tachments.
- Models R5 Plus and R6 (three-phase) are provided
with two speeds 1500 and 3000 Rpm.
- Model R5 Plus (single-phase) is provided with one
speed of 1.500 Rpm.
- Models R5 V.V. and R6 V.V. are equipped with a
speed variation which varies between 300 and
3.000 Rpm to ensure more flexible use and give a
wide range of tasks.
- Machines in compliance with strictest hygiene and
safety standards.
• PACKAGIN G
The packaging for these models has been specially
designed to prevent damage occurring in transit.
Details of the contents are clearly marked on the
packaging:
- type of device;
- voltage;
- attachments (if any);
- serial number;
Dimensions (in mm):
Heigh 580 Lenght 500 W idth 400.
3) Engage the blade on
the motor shaft and lo-
wer it right to the bottom
of the bowl.
Make sure that it is cor-
rectly positioned, by rota-
ting it in the bowl.
4) Place the lid on the
bowl and rotate to the
right until it clicks.
The device is now ready
for use. The green light
should therefore be
illuminated.
TECHN ICAL
SPECIFICATION S
• DESCRIPTION AN D ADVAN TAGES
- 5.5-litre stainless steel bowl for models R5 Plus
and R5 V.V.
- 6.5-litre stainless steel bowl for models R6 and
R6 V. V.
- A patented blade, an exclusive ROBOT-COUPE
feature, gives perfect result for small or large
quantities.
- New blade profile for optimum cutting quality.
- Pulse control for better cutting precision.
• W EIGHT net weight gross weight
R5 Plus 24 kg 26 kg
R5 V.V. 25 kg 27 kg
R6 25 kg 27 kg
R6 V.V. 26 kg 28 kg
• DIM EN SION S (in mm)
R5 Plus R5 V.V. R6 R6 V.V.
A 480 480 520 520
B 350 350 350 350
C 280 280 280 280
D 265 265 265 265
To Next Page
Loading...
