8
R5 Plus R6/
R5 V.V. R6 V.V.
Max. Max.
USES
processing processing Suggested Processing
quantity quantity speed time
(in kg) (in kg) (in Rpm) (in mn)
CHOP
• M EAT
Hamburger/ steak tartare 1,5 2
1200/
3
1500
Sausagemeat/ tomatoes 2 2,5
1200/
3
1500
Terrine / pâté 2,5 2,5
1200/
4
1500
• FISH
Brandade 2,5 3 3000 5
Terrines 2,5 3 3000 5
• VEGETABLES
Garlic/ parsley / onion / shallots 0,5 / 1,0 0,5 / 1,5
1500/
3
2000
Soup / purées 2 3
2500/
4
3000
• FRUIT
Compotes / purées 2 3
2500/
4
3000
EMULSIFY
Mayonnaise / ailloli /
33,5
600/
3
rémoulade sauce
1500
Hollandaise / béarnaise 2 3
600/
5
1500
Snail or salmon butter 2 2,5
600/
4
1500
KN EAD
Shortcrust pasty / Shortbread 2 2,5
900/
4
1500
Flaky pastry 2 2,5
900/
4
1500
Pizza dough 2 2,5
900/
4
1500
The pulse control allows you to stop and start the ma-
chine for high-precision control when working with
certain types of ingredients.
The cutter version has numerous other applications.
The above quantities and times are approximate and
may vary according to the quality of the ingredients
and recipes.
OPTION
For the R5 Plus and R5 V.V.
models, a serrated blade knife
is available as an option.
For the R6 and R6 V.V. models,
serrated blades are available
as an option.
The serrated blades are recommended for grinding
and kneading tasks.
CLEAN IN G
• CUTTER
After removing the lid, remove the bowl from the motor
base by pushing the trigger fitted in the handle. Pull up
to disengage, leaving the blade in the bowl
in order to prevent any spillage when working with
liquids.
If the food has a solid consistency, remove the blade
and empty the bowl.
Replace the bowl, place the blade back on the shaft
and switch on the machine in order to remove any
mixture which may have stuck to the blade.
If you wish, you can rinse the bowl by filling it with
hot water and switching on for a few minutes.
• BLADE
The stainless steel blade of R6 - R6 V.V. is easy to
dismantle and to clean.
GRIND
Dried fruit 1 1,5
900/
4
1500
Ice 1 1,5
900/
4
1500
Breadcrumbs 1 1,5
900/
4
1500
• MOTOR BASE
N ever immerse the motor base in water. Clean
using a damp cloth or sponge.
Ensure power supply to machine is disconnected.
1 - Place blade dismantling tool over shaft onto
motor base.
2 - Fit blade onto shaft ensuring it is correctly
positioned.
3 - Insert bar into blade cap and turn anti-clock-
wise to dismantle .
W hen re-assembling do not over tighten.
A - Upper blade.
B - Lower blade.
After cleaning the blade, always dry the blades well
to prevent rusting.
As a precaution, always unplug your appliance
before cleaning it (risk of electrocution).
WARN ING
To Next Page
Loading...
