3
Front panel assembly Flusher valve box Magnet Long screw
Snap-in box Battery assembly Transformer Installation manual
Only A35945M..0 , A35945T..0
Only A35945E..0 , A35945S..0
Only A35945M..0 , A35945T..0
1 Part list of Urinal Sensor Flusher
2 Specification
Model A35945E..0 , A35945S..0 A35945M..0 , A35945T..0
Power 4 x LR6/ 1.5V/AA alkaline batteries AC100-240V~, 50/60HZ
Sensor
specification
Method Reflective infrared sensor
Sensitive distance Adjustable 30-70cm (Use white card)
Flushing procedure
Flushing mode Intensive and water saving
Manual flush Control water supply and stop water supply within 5 minute manually.
Deodorizer flush
Deodorizer flush should be activated one time under 3 users used in consecutive 2
minutes.
Self-cleaning Self-cleaning will be implemented once while this product is not used during 24 hours.
Main Flush volume 3.5L (+/-0.5) (Dynamic pressure is 0.2Mpa(2bar))
Working temperature 1~55°C
Water inlet connection G ½”
Working water pressure 0.05~0.7Mpa(0.5~7bar)
To Next Page
Loading...
