Roche Accu-Chek Instant - Performing Blood Glucose Tests; Blood Glucose Testing Process

9
Your New System
1
Setting the Time and Date
1
Press to turn the
meter on.
The flashing test strip
symbol appears on
the display.
2
Press and hold
until set-up appears
on the display. The
hour flashes.
Press
to increase
the hour or press
to decrease the
hour.
3
Press and hold to
set the hour and
move to the next
field. The minutes
flash.
Press
to increase the minutes or
press
to decrease the minutes.
4
Repeat step 3 to
adjust each field.
After setting the year,
press and hold
until the flashing test
strip symbol appears
to save your settings.
NOTE
• The meter prompts you to set the
time and date the first time you turn
the meter on or if an error occurs.
• Press and hold
at any time until
the flashing test strip symbol
appears to perform a test.
• The time and date on the meter
synchronizes to the time and date on
the paired device each time the
meter sends data to the paired
device. See the chapter Wireless
Communication and Meter Pairing.
83715_09767959061A.indd 983715_09767959061A.indd 9 6/29/2021 11:30:22 AM6/29/2021 11:30:22 AM