10
Blood Glucose Tests
2
w WARNING
Risk of a serious health incident
Using the wrong unit of measurement
may cause misinterpretation of your
actual blood glucose level and may
lead to improper therapy. Blood
glucose results can be displayed in
either mg/dL or mmol/L. The back
label of the meter shows the unit of
measurement. If the meter shows the
wrong unit, contact Roche. If you do
not know which unit of measurement
is correct for you, contact your
healthcare professional.
mg/dL or mmol/L is printed here
Using the Accu-Chek
Instant System
w WARNING
Risk of a serious health incident
If you drop the meter or drop the meter
with a test strip inserted, the meter
and/or test strip could be damaged.
Discard the test strip and perform a
control test with control solution and a
new, unused test strip to ensure the
meter and test strips are working
properly. Then repeat the blood
glucose test with a new test strip.
Risk of a serious health incident
• A test strip that is not stored or used
properly can deliver an incorrect test
result.
• Do not store test strips in high heat
and moisture areas (bathroom or
kitchen)! Heat and moisture can
damage test strips.
• Use only Accu-Chek Instant test strips.
• Use the test strip immediately after
removing it from the test strip
container.
• Do not apply blood or control solution
to the test strip before inserting it into
the meter.
• Close the test strip container tightly
immediately after removing a test strip
to protect the test strips from humidity.
• Store the unused test strips in their
original test strip container with the
cap closed.
83715_09767959061A.indd 1083715_09767959061A.indd 10 6/29/2021 11:30:23 AM6/29/2021 11:30:23 AM
To Next Page
Loading...
