23
Wireless Communication and Meter Pairing
5
Overview
The process of creating a connection
between the meter and the mobile device
is called pairing. You will need an
application on your mobile device that
can accept the meter data. You can use
this application to wirelessly and
automatically synchronize your diabetes
information between the meter and the
mobile device.
Pairing
The meter can only pair with 1 device at
a time. Pairing with a second device
overwrites the first pairing.
The meter and the device to be paired
should be within 1 meter of each other.
1
On Your Mobile Device
Open the app and select Pair Meter.
If prompted, turn on Bluetooth.
On Your Meter
With the meter o,
press and hold
until the Bluetooth
symbol appears. The
pairing symbol and
wireless symbol both
appear and flash.
On Your Mobile Device
Within the app, select your meter
from the list of found meters. When
prompted, enter the 6-digit PIN
number located on the back of your
meter.
The meter times out after 30 seconds
once you are prompted to enter the
PIN.
4
On Your Meter
or
OK appears if pairing is successful.
Err appears if pairing is unsuccessful.
NOTE
The meter has time and date
auto-sync capability when paired with
a mobile device that will update the
meter time and date automatically.
Even if you use your meter in multiple
time zones, results are stored from
newest to oldest and not by time and
date.
83715_09767959061A.indd 2383715_09767959061A.indd 23 6/29/2021 11:30:49 AM6/29/2021 11:30:49 AM
To Next Page
Loading...
