Roche Accu-Chek Instant - Reviewing Your Data; Meter Data Storage Overview; Accessing Stored Blood Glucose Results

18
Control Tests
3
4
Select the control
solution to test. You
will enter the level
later in the test.
5
Remove the bottle
cap. Wipe the tip of
the bottle with a
tissue. Squeeze the
bottle until a tiny
drop forms at the tip.
6
Touch the drop to the yellow edge of
the test strip. Do not put control
solution on top of the test strip.
Remove the control bottle from the
test strip when the flashing hourglass
symbol appears.
7
or
or
The control result, the bottle symbol,
and the flashing L1 or L2 appear on
the display. Press and hold
to
confirm the control level you tested.
Press
or to alternate between
L1 and L2.
NOTE
When performing a control test: If the
control bottle symbol and the flashing
L1 or L2 DO NOT appear on the display
with your control result, an error has
occurred.
• Do not act on the control result.
• Discard the test strip and repeat the
control test with a new test strip.
83715_09767959061A.indd 1883715_09767959061A.indd 18 6/29/2021 11:30:38 AM6/29/2021 11:30:38 AM