7
Your New System
1
Using the Meter Buttons
When instructed to press a meter button, press it briefly and release it.
When instructed to press and hold a meter button, press and hold it for 3 or more
seconds.
Button Functions
Here are the functions of the Up button and Down button on the meter. These
functions are used throughout this manual.
[Up button]
Increase an option.
Move forward through results in memory.
Set time and date selections.
Turn meter o.
Press and hold.
[Down button]
Move back through results in memory.
Enter set-up mode.
Enter Bluetooth pairing mode.
Press and hold.
Target Range
NOTE
The target range indicator is not a
substitute for hypoglycemia training by
your healthcare professional.
Consult your healthcare professional for
the blood glucose range appropriate for
you. It is very important to stay within
your target range.
The target range is set by default at
70–180 mg/dL (3.9–10.0 mmol/L). The
target range can be set from a lower limit
of 60–140 mg/dL (3.3–7.8 mmol/L) to an
upper limit of 90–300 mg/dL
(5.0–16.6 mmol/L).
To change the target range, pair the
meter to a mobile device, or connect it to
a PC with diabetes management
software installed. Then follow the
diabetes management software
instructions.
83715_09767959061A.indd 783715_09767959061A.indd 7 6/29/2021 11:30:05 AM6/29/2021 11:30:05 AM
To Next Page
Loading...
