Roche Cobas C111 User Manual

cobas c 111
Host Interface Manual
Version
2
.1
50 / 93
Field Name Reference Format
Comments (Data Content) R|10.1.
Result Status 10.1.09 ST Indicates the number of the test conducted for the analytical data.
Field Value Description
F : Final Result:
Used to indicate initial transmission of result (Validated Result)
C: Correction of previously transmitted result
(i.e., the result of a test-re-run is transmitted)
X : Test cannot be completed:
Used to indicate an error during processing
(e.g. the result has been blocked by instrument)
R: Repeat:
Used to indicate previously transmitted result
(i.e. indicates re-transmission of already sent result)
I: QC result is ignored
Date of Change in
Instrument Normative
Values Units
10.1.10 Not used / ignored by cobas c 111 instrument
Operator
Identification
10.1.11 ST Identifies the operator.
cobas c 111 instrument receives data:  Field is ignored
cobas c 111 instrument transmits data:  Field contains the ID of the
operator who released the result or $SYS$ if the results was automatically
accepted.
Date time test started 10.1.12 TS Not used / ignored by cobas c 111 instrument
Date Time test
completed
TS Date and time the test result was calculated is
designated by YYYYMMDDHHMMSS.
Instrument ID 10.1.14 ST Not used / ignored by cobas c 111 instrument
EndOfRecord
Field 10.1.6 examples
Example1:
4R|1|^^^687|48.4|U/L|20.0\30.0|N||C||admin
Field 10.1.7 examples
Example 1: QC flag Higher than reference range ( H)
4R|1|^^^687|49.2|U/L|20.0\30.0|H||F||admin
Example 2: QC flag Under test range ( <)
4R|1|^^^687|-0.1|U/L||<||F||admin

Roche Cobas C111 Specifications

General

Brand	Roche
Model	Cobas C111
Category	Measuring Instruments
Language	English