Rocket Espresso R9V - Machine Movement Installed; Description of the Machine; Designated Use; R9 V Technical Specifications

14
R9V
Operation has to be carried out
when the machine is o󰀨 and cold.
Before handling:
■ Disconnect the power supply cable.
■ Disconnect the water supply.
Once the Machine is placed in the new instal-
lation area, reconnect the power supply cable
and the water pipe. (see cap. 6.2 e 6.3) .
The handling means used must be in per-
fect working conditions (see cap 5.2)
2.2.1 Machine movement
installed
MACHINE
UNDER
MAINTENANCE
i
3 - DESCRIPTION OF THE
MACHINE
The machines have been designed and man-
ufactured to be used to make espresso co󰀨ee
and hot beverages (tea, cappuccino, etc.).
Any other use is to be considered unsuitable
and therefore dangerous.
The manufacturer cannot be
held responsible for any damage
caused to people or things due
to unsuitable, erroneous or irra-
tional use of the machine
The operator must always follow the indica-
tions contained in this manual. In the case
of a failure or if the machine is not working
properly, switch it o󰀨 and do not attempt any
direct repair. Contact the service center.
3.1 Designated use
MACHINE
UNDER
MAINTENANCE
i
3.2 R9V technical specifica-
tions
Features
■ Programmable pressure prole system
■ Digital touch display
■ Brew boiler capacity:
1,9 litre - 1200 W
■ Service boiler capacity:
3,6 litre - 1400 W
■ Water source option:
Hard plumbing
■ Wattage: 1600 W
■ Five pump pressure proles + one semi
automatic prole
■ Permanent magnets volumetric pump.
Dimensions and weight (g_3.1)
■ 2GR = 834 x 521 x 643 mm
■ 3GR = 1055 x 521 x 643 mm
(A-width x B-height x C-depth)
■ Weight: 105 kg (R9V 2GR)
120 kg (R9V 3GR)