6
R9V
DANGER: this symbol indicates information or procedure which, if not carefully
performed, could cause serious personal injuries. Potential source of injury or harm
to health.
WARNING
Indications accompanied by this symbol contain information, prescriptions or proce-
dures which, if not performed correctly may lead to damage or tanker malfunctions.
INFORMATION
Indications accompanied by this symbol contain information on any topic of particular
importance failure to observe them may result in nullification of the warranty.
Carefully READ the instruction manual before commissioning.
ATTENTION: machine connected!
Before any maintenance action is undertaken, disconnect the power supply.
ATTENTION: hot contact parts!
ATTENTION: crushing hazard
ATTENTION: use a suitable lifting device
1 - INTRODUCTION
1.1 SYMBOLS AND TERMINOLOGY USED IN THE MANUAL
BEFORE PERFORMING ANY OPERATION ON THE MACHINES, THE OPERATORS
MUST CAREFULLY READ THE INSTRUCTIONS CONTAINED IN THIS
PUBLICATION (AND IN ATTACHED ONES) AND FOLLOW THEM THROUGHOUT
THE INTERVENTIONS.
IF IN DOUBT ON THE CORRECT INTERPRETATION OF THE INSTRUCTIONS,
CONTACT OUR ASSISTANCE SERVICE FOR THE NECESSARY CLARIFICATIONS.
To Next Page
Loading...
