Rockwell Automation Publication 2080-UM002N-EN-E - November 2022 155
Chapter 8 EtherNet/IP Network
0x0810
No target application data
available.
Given data type does not match Produce tag data type in the
target module.
For the target device associated with the “Send Data”
connection reporting this connection error, start the
controlling application and perform at least one write of
data. See the user manual for the target device and its
controlling application for information on how to do this.
0x0814
Connection Request Error:
Data Type Mismatch.
Given data type does not match Produce tag data type in the
target module.
Verify that both data types match.
0xFD02
Connection Request Error:
No error code is supplied by an
I/O module to describe an I/O
fault.
No error code is supplied by an I/O module to describe an
I/O fault.
See the user manual for your device.
Table 25 - List of Connection Fault Codes (Continued)
Fault Code Display Text Fault Corrective Action
To Next Page
Loading...
Need help?
General
