4 Micro800 Digital Input, Output, and Combination Plug-in Modules
Publication
2080-WD011A-EN-P - January 2012
Parts List
Your package contains one Micro800™ digital input, output, or combination
plug-in module, two module fastening screws, and these pinout guide wiring
instructions.
You can choose to wire the plug-in before inserting it onto the controller, or
wire it once the module is secured in place.
ATTENTION: This plug-in module is intended for use with Micro800
Family of Programmable Controllers.
45867
actual status
indicators vary
depending on
catalog number
To Next Page
Loading...
