8 Micro800 Digital Input, Output, and Combination Plug-in Modules
Publication
2080-WD011A-EN-P - January 2012
Output Specifications, 2080-OB4, 2080-OV4, 2080-IQ4OB4, 2080-IQ4OV4
Attribute Value
Power supply voltage, min 10.8V DC
Power supply voltage, max 30V DC
On-state voltage, min 10V DC
On-state voltage, nom 24V DC
On-state voltage, max 30V DC
On-state current 5.0 mA @ 10V DC, min
0.5 A max, steady state
2 A surge, 2 s min
General Specifications
Attribute Value
Mounting torque 0.2 Nm (1.48 lb-in.)
Status indicators For input or output modules
4 yellow
For combination modules
8 yellow
Terminal base screw torque 0.22…0.25 Nm (1.95…2.21 lb-in.)
using a 2.5 mm (0.10 in.) flat-blade screwdriver
Enclosure type rating None (open-style)
Isolation voltage For input modules
50V (continuous), Basic Insulation Type, Inputs to Backplane
Type tested for 60 s @ 720 V DC, Inputs to Backplane
For combination or output modules
50V (continuous), Basic Insulation Type, Inputs to Outputs, I/Os to
Backplane
Type tested for 60 s at 720 V DC, I/Os to Backplane
Wire size
0.2... 2.5 mm
2
(24...12 AWG) solid or stranded copper wire rated at
90 °C (194 °F), or greater, insulation max
Wire category 2 – on signal ports
2 – on power ports
North American temp code T4
To Next Page
Loading...
