Rockwell Automation ARMORSTART User Manual

Rockwell Automation Publication 280E-PM001A-EN-P – August 2011 15
ArmorStart
®
EtherNet/IP
™
Communications & Control Programming Manual Chapter 2
1. If a controller path is not set in the field shown below, you must first set a
path before going online with the controller. Click on the RSwho
button shown below.
2. Expand and browse the AB_ETHIP-1, Ethernet driver.
3. Select the Controller path. Then click Go Online.

Rockwell Automation ARMORSTART Specifications

General

Brand	Rockwell Automation
Model	ARMORSTART
Category	Controller
Language	English