Rockwell Automation MagneMotion MagneMover LITE Service Manual

Maintenance
Repair
MagneMover LITE Service Manual 77
Rockwell Automation Publication MMI-UM037A-EN-P - April 2020
Separating Magnet Arrays
Magnet arrays can become stuck to each other or to any ferrous materials through improper
handling. It is the responsibility of the user to define and implement their own separation pro-
cedures. It can be impossible to separate large magnet arrays.
• Magnet arrays that become stuck to each other should only be separated by trained
personnel. Returning stuck magnet arrays to MagneMotion for separation is recom-
mended.
• Magnet arrays stuck to a surface can be removed by sliding the array to the edge of the
surface it is stuck to. Then move the array so it is only in minimal contact with the
edge and then lift the array away from the edge starting at one end of the array.
CAUTION
Strong Magnets
To avoid severe injury, people with pacemakers and other
medical electronic implants must stay away from the magnet
arrays.
To avoid injury from strong magnetic attractive forces:
• Handle only one vehicle (puck) or magnet array at a time.
• Do not place any body parts, such as fingers, between a
vehicle (puck) or magnet array and any ferrous material
or another magnet array.
• Vehicles (pucks) or magnet arrays not being used must be
secured individually in isolated packaging.
To avoid damage to watches, electronic instruments, and
magnetic media (for example, cell phones, memory
disks/chips, credit cards, and tapes), keep these items away
from the magnet arrays.

Rockwell Automation MagneMotion MagneMover LITE Specifications

General

Brand	Rockwell Automation
Model	MagneMotion MagneMover LITE
Category	Accessories
Language	English