27
Publication 1763-IN001C-EN-P - June 2015
Out
put Specificat
ions For Hazardous Locations Applications
(Class I, Division 2, Groups A, B, C, D)
Analog Inputs
Description 1763-L16AWA, -L16BWA, -L16BBB, -L16DWD
Voltage Input Range 0 ...10.0V dc - 1 LSB
Type of Data 10-bit unsigned integer
Input Coding (0 to 10.0V dc - 1 LSB) 0 ...+1,023
Voltage Input Impedance 210 kΩ
Input Resolution 10 bit
Non-linearity
±0.5% of full scale
Overall Accurarcy
-20...+65 °C (-4...+149 °F)
±0.5% of full scale
Voltage Input Overvoltage Protection 10.5V dc
Field Wiring to Logic Isolation Non-isolated with logic
General
Description 1763
-L16AWA, -L16BWA,
-L16DWD
-L16BBB
Relay and FET Outputs
Maximum Controlled Load 1080 VA 360 VA
Maximum Continuous Current:
Current per Group Common 3A 3A
Current per Controller at 150V max 18 A or total of per-point loads, whichever is less
at 240V max 18 A or total of per-point loads, whichever is less
Relay Outputs
Turn On Time/Turn Off Time
10 msec (maximum)
(1)
(1)
Scan time dependent.
Relay life - Electrical (Resistive Load) Refer to Relay Life Chart
Relay life - Mechanical 10,000,000 cycles
Load Current 10 mA (minimum)
To Next Page
Loading...
Need help?
General
