Rockwell Automation PowerFlex 753 User Manual

Rockwell Automation Publication SYSLIB-RM044D-EN-P - February 2017 55
PowerFlex 753 Drive (P_PF753)
Engineering Tab Page 4
The following table shows the functions on page 4 of the Engineering tab.
Table 20 - Engineering Tab Page 4 Description
Function Action Security Configuration Parameters
Speed Reference -
Operator keeps
control in Program
mode
Check to keep control of the drive
Speed Reference with the Operator,
even if the instruction is in Program
mode.
Clear this checkbox to have control
of the drive Speed Reference follow
the Instruction mode.
Engineering
Configuration
(Code E)
Cfg_OperKeep.0
Speed Reference -
Program keeps
control in Operator
mode
Check to keep control of the drive
Speed Reference with the Program,
even if the instruction is in Operator
mode.
Clear this checkbox to have control
of the drive Speed Reference follow
the Instruction mode.
Cfg_ProgKeep.0

Rockwell Automation PowerFlex 753 Specifications

General

Brand	Rockwell Automation
Model	PowerFlex 753
Category	Controller
Language	English