MC16 Operating Manual 09.01.2020
Restart Controller without
Dynamic Data Reload
When triggered then controller is restarted and all dynamic data (usage limits,
occupancy limits, APB register, etc.) is deleted.
As long as triggered then alarm zone is maintained armed.
Set Alternately Armed ON/Armed
OFF Mode
When triggered then alarm zone is switched to opposite armed mode.
When triggered then Alarm Zone is armed.
When triggered then Alarm Zone is disarmed.
Disable Armed ON Mode Toggle
As long as triggered then Alarm Zone arming is blocked.
When triggered then Alarm Zone arming is delayed by the parameter Auto-
arming Delay when Zone not Ready for Arming.
When triggered then outputs with functions [045] and [047] are activated. The
function is also used to arm Integra or Galaxy alarm panel if it is integrated
with RACS 5 system.
When triggered then outputs with functions [046] and [047] are activated. The
function is also used to disarm Integra or Galaxy alarm panel if it is integrated
with RACS 5 system.
Request Alternately Armed
ON/Armed OFF Mode
When triggered then outputs with functions [047] and [045] or [046]
depending on current mode are activated. The function is also used to
arm/disarm Integra or Galaxy alarm panel if it is integrated with RACS 5
system.
When triggered then list of Access Credentials (and their users) logged in the
zone is deleted. It affects mainly occupancy count in the zone.
Clear Anti-passback Register
When triggered then APB register is deleted.
Restart Controller with Dynamic
Data Reload
When triggered then controller is restarted and all dynamic data (usage limits,
occupancy limits, APB register, etc.) is preserved.
TML Supply Output Overload
Toggle
As long as triggered then TML output overload is reported to controller.
AUX Supply Output Overload
Toggle
As long as triggered then AUX output overload is reported to controller.
To Next Page
Loading...
