MC16 Operating Manual 09.01.2020
Triggered when Automation Node is switched on.
Triggered when Automation Node is switched off.
Triggered when Automation Node is switched on or switched off.
Triggered as long as door is opened. It replicates input with the function [130]
within the same Access Door.
Triggered when door is opened. It reports activation of input with the function
[130] within the same Access Door.
Triggered when door is closed. It reports deactivation of input with the
function [130] within the same Access Door.
Triggered when door is opened and closed. It reports activation and
deactivation of input with the function [130] within the same Access Door.
Door Open Too Long Prealarm
Triggered as warning before actual Door Open Too Long Alarm. Activation
moment depends on Access Door parameter Door Open Too Long Prealarm
Time.
Triggered when access is granted at Access Door. The function is used to
control door lock (door strike, maglock, etc.)
Triggered when Door Open Too Long Alarm is raised. It depends on input
with the function [130] and Access Door parameter Door Open Too Long
Time.
Triggered when Door Forced Alarm is raised. The alarm is detected when
access is not granted by controller but input with the function [130] is
triggered.
Triggered when door bell is activated at Access Door i.e. input with the
function [131] is triggered.
Triggered when access is granted by user identification at Access Point with
the parameter Read-in or Read-in/out. The function is mainly used to control
read-in/out portal such as turnstile, gate, etc. Contrary to function [37] it is
used to control by means of status.
Read-out Door Lock Status
Triggered when access is granted by user identification at Access Point with
To Next Page
Loading...
