Rohde & Schwarz 1309.6000.08 - Displaying the Reflection in the Smith Chart

R&S FSH Two-port measurements with the tracking generator
1309.6275.12 4.61 E-2
In the upper diagram the R&S FSH shows the
m
agnitude of the reverse attenuation. In the lower
diagram the phase curve of the DUT is shown as
functions of frequency. In the upper area of the screen,
the R&S FSH shows REFLECTION (CAL)
MAGNITUDE + PHASE.
Displaying the reflection in the Smith chart
 Press the FORMAT softkey.
 Using the cursor keys or the rotary knob, select
SMITH CHART from the menu.
Confirm the selection with the ENTER key or by
pressing the MEAS MODE softkey again.
The R&S FSH will show the reflection of the DUT in
the Smith chart.