Setting the Amplitude Parameters R&S FSH
1309.6275.12 4.8 E-2
Entering the display range
Press the AMPT key.
Press the RANGE/REF POS softkey.
A submenu opens. The various options for scaling the
level axis are displayed.
Using the rotary knob or the cursor keys, select the
scaling option you want and confirm by pressing
the ENTER key.
The scaling option you have chosen is immediately set
on the R&S FSH.
Selecting the menu item REF POSITION: 10 moves
the position of the trace to another line on the diagram.
This lets you display signals in full which would
normally overlap with the top of the diagram.
Press the RANGE/REF POS .
Using the rotary knob or the cursor keys, select REF
POSITION: 10 and confirm with the ENTER key.
Using the rotary knob, the cursor keys or the
numeric keys, select the desired grid line. The value
10 corresponds with the upper grid line, the value 0
corresponds with the lowest grid line.
The position of the reference level is marked by a
triangle on the selected grid line.
To Next Page
Loading...
