Saving and Loading Instrument Settings and Measurement Results R&S FSH
1309.6275.12 4.88 E-2
Saving results
Press the SAVE softkey.
The R&S FSH opens a text box and prompts the user
to enter a name for the data set.
The Name entry box, which is highlighted in red, also
suggests a name for the data set (DATASET.003)
which can be accepted by pressing the ENTER key.
For the sake of simplicity, the R&S FSH also saves the
data set when the SAVE softkey under the suggested
name is pressed twice.
The softkey INTERNAL / SD CARD selects either the
internal memory of the FSH or the SD card as the
storage medium for the data set.
The remaining free memory size (Free xx MB) is also
displayed in the text box. Since the data sets can be
different in size, the remaining storage space is
indicated as a percentage value.
The data set name comprises a text section and a numeric extension, which are separated by a full
stop. The data set name suggested by the R&S FSH is derived from the name of the data set last
stored, the numeric extension being incremented by 1 in each case.
This means that consecutive data set names can be assigned by simply saving with SAVE or ENTER.
The names of the data sets already stored can be displayed one after the other using the BACK key.
This allows, for example, to store new results under the name of a previous data set (for example
Antenna.000), but with a new extension. The R&S FSH displays the old name together with the first
unassigned extension, e.g. Antenna.001. No new name has to be entered.
Entering a data set name
A new name can be entered with the numeric keypad. The letter assignment for the keypad is the same
as that for a mobile phone
Alphanumeric
Keypad
BACK key
CANCEL key
ENTER key
To Next Page
Loading...
