Rohde & Schwarz 1309.6000.08 - Trace Memory

Trace Settings R&S FSH
1309.6275.12 4.22 E-2
Trace memory
T
he R&S FSH can transfer a trace to the trace memory and also display the current trace and the trace
in the trace memory for comparison. The saved trace is always displayed in white to distinguish it from
the current trace.
Operating sequence:
 Press the TRACE key.
 Press the TRACE -> MEMORY softkey.
The R&S FSH transfers the selected trace (see Trace
Selection) to the trace memory.
 Press the SHOW softkey.
 Select the desired memory trace from the menu
using the cursor keys or rotary knob. Confirm the
selection by pressing ENTER.
The R&S FSH displays the saved trace in white. The
menu entry of the selecte memory trace is marked with
an X to indicate that the trace in the trace memory is
being displayed.
 To remove the saved trace from the screen, press
the SHOW softkey again.
 In the menu select the memory trace mar
ked with
X and confirm with ENTER.
The selected memory trace will be removed from the
screen.
Note: The memory traces are bit-mapped into the picture memory. Therefore, when the memory
trace is recalled, it will not be adapted to any modifications of the reference level or span
that may have been made in the meantime.
When a stored data set is called, the R&S FSH stores the associated trace in the trace
memory. The stored trace can be displayed with SHOW MEMORY.