Rohde & Schwarz 1309.6000.08 - Page 73

Using the Markers R&S FSH
1309.6275.12 4.26 E-2
 Press the SEARCH LIMITS softkey.
 Using the rotary knob or the cursor keys, select
SEARCH LIMITS ON/OFF.
 Confirm your choice with the SEARCH LIMITS
softkey or the ENTER key.
Der R&S FSH schaltet die Begrenzung des Marker-
Suchbereichs ein. Zur Kennzeichnung des
Bereichswerden zwei vertikale Linien im Diagramm
eingeblendet.
 For entering the start of the search range, press
softkey SEARCH LIMITS.
 Select the LOWER LIMIT menu item with the rotary
knob or the cursor keys and confirm your choice by
pressing the SEARCH LIMITS softkey or the
ENTER key.
The R&S FSH opens the entry field for the start
frequency of the search range.
 Enter a start frequency with the numeric keys and
terminate the entry with the desired unit or change
the start frequency with the rotary knob or the cursor
keys and terminate the entry with the ENTER key.
The R&S FSH indicates the start of the search range
by means of a vertical line in the diagram.
The procedure for entering the stop frequency for the search range is analogous to that for entering the
start frequency.
Deactivating the marker search range:
If a marker search range is activated, the softkey SEARCH LIMITS in the MKR-> menu is highlighted in
green.
 Press the SEARCH LIMITS softkey to deactivate the marker search range.
 Using the rotary knob or the cursor keys, select SEARCH LIMITS ON/OFF.
 Deactivate the search in the limited range using the SEARCH LIMITS softkey or the ENTER key.
the softkey SEARCH LIMITS is no longer highlighted.