Trying Out the Instrument
R&S
®
FPL1000
57Getting Started 1323.1602.02 ─ 07
d) Drag the "Real/Imag (I/Q)" icon from the evaluation bar to the SmartGrid to
replace the default "Magnitude" display.
Figure 6-8: Inserting a Real/Imag diagram for I/Q analysis
e) Close the SmartGrid mode.
The "IQ Analyzer" measurement channel displays the real and imaginary sig-
nal parts in separate windows.
To display the MultiView tab
An overview of all active measurement channels is provided in the "MultiView"
tab. This tab is always displayed if more than one measurement channel is active
and cannot be closed.
► Tap the "MultiView" tab.
Activating Additional Measurement Channels
To Next Page
Loading...
