Rohde & Schwarz FPL1000 Series - Printing and Saving Results

Trying Out the Instrument
R&S
®
FPL1000
68Getting Started 1323.1602.02 ─ 07
2. Tap the "Load" icon in the toolbar.
3. In the "Load" dialog box, select the MyMultiViewSetup.dfl file in the
default directory
C:\Users\Public\Documents\Rohde-Schwarz\Analyzer\Save.
4. Tap the "Load" button.
All instrument settings are restored and the display should resemble the
instrument display right before the settings were stored.
6.9 Printing and Saving Results
Finally, after a successful measurement, we will document our results. First we
will export the numeric trace data, then we will create a screenshot of the graphi-
cal display.
To export the trace data
1. Press the [Trace] key on the front panel.
2. Tap the "Trace Config" softkey.
3. Tap the "Trace / Data Export" tab.
4. Tap the "Export Trace to ASCII File" button.
5. Enter the file name MyMultiViewResults.
The trace data is stored to MyMultiViewResults.DAT
To create a screenshot of the display
1. Tap the "Print immediately" icon in the toolbar.
A screenshot of the current display is created. Note that the colors on the
screen are inverted in the screenshot to improve printout results.
Printing and Saving Results