R&S FSH Interference Analyzer (R&S FSH-K15/ -K16)
Working with Maps
Operating Manual 1173.6275.12 - 30 161
5.2.3.1 Zooming in and out of the Map
If you have downloaded different zoom levels of your maps, or if you have created a
large (or very small) indoor map, you can change the scale of the map to get a more
detailed view or a more general overview.
Note that the original size of indoor maps depends on the size of the image these
maps are based on.
► Press the "Zoom In" softkey to decrease the scale of the map.
► Press the "Zoom Out" softkey to increase the scale of the map.
5.2.3.2 Aligning the Map (R&S FSH-K15 and -K16)
The R&S FSH provides several tools to align the map. This is useful if you want your
current location to be in the center of the display or if you have moved out of the visible
map area.
Manual alignment
► Use the cursor keys to move the map in a particular direction.
You can move the maps until you reach the borders of the downloaded content.
Note that the borders of the maps might be different for different scales.
Automatic alignment
For most automatic map alignment functions, you have to establish a GPS connection.
► Press the "GPS Position" softkey.
The R&S FSH opens a menu that contains various functions to control and work
with GPS data.
In this menu, you can select from the following automatic alignment functions.
● "Go To Current Position"
Moves your current position to the center of the display once.
● "[ ] Trace Current Position"
Keeps your current position in the center of the display, even if you move.
● "Go To Triangulation Position"
Moves the location of the triangulation result to the center of the display.
To Next Page
Loading...
