Rohde & Schwarz RTA4004 - Page 707

Remote control commands
R&S
®
RTA4000
707User Manual 1335.7898.02 ─ 08
Parameters:
<TransmissionTimeMin>
TRIGger:A:ARINc:TYPE <TriggerType>
Selects the type of trigger.
Parameters:
<TriggerType> WORD | ERRor | LABel | LDATa | TTIMe
TRIGger:A:ARINc:WORD:TYPE
<WordType>
Sets the word type to be triggered on.
Parameters:
<WordType> STARt | STOP
17.11.9.3 ARINC 429 decode results
BUS<b>:ARINc:WCOunt?...............................................................................................707
BUS<b>:ARINc:DATA:FORMat........................................................................................707
BUS<b>:ARINc:WORD<n>:DATA[:VALue]?......................................................................708
BUS<b>:ARINc:WORD<n>:FORMat?.............................................................................. 708
BUS<b>:ARINc:WORD<n>:LABel[:VALue]?..................................................................... 708
BUS<b>:ARINc:WORD<n>:PARity?.................................................................................708
BUS<b>:ARINc:WORD<n>:PATTern?.............................................................................. 709
BUS<b>:ARINc:WORD<n>:SDI?.....................................................................................709
BUS<b>:ARINc:WORD<n>:SSM?................................................................................... 709
BUS<b>:ARINc:WORD<n>:STARt?.................................................................................709
BUS<b>:ARINc:WORD<n>:STATus?............................................................................... 710
BUS<b>:ARINc:WORD<n>:STOP?..................................................................................710
BUS<b>:ARINc:WCOunt?
Returns the number of decoded words.
Suffix:
<b>
.
1..4
Return values:
<WordCount>
Usage: Query only
BUS<b>:ARINc:DATA:FORMat <StandardDecodeFormat>
Sets the decoding data format for the specified ARINC 429 bus.
Suffix:
<b>
.
1..4
Serial bus analysis